How to use Hardware Series: Slides as Buckles

Behold: The humble Slide- but what is it and how can craftspeople and leathersmiths get the most out of this versatile piece of hardware?

Sometimes buckle, sometimes size adjustor strap- tri-glide slides – often just called “slides” – come in two styles (die cast or stamped) and many finishes.

 

Tri-glide slides are a piece of incredibly versatile hardware that is used in many craft applications and especially in strap goods like belts, dog collars, and some horse tack (although for horse tack a modified version of the tri-glide is popular. It is called a Conway buckle, and is a uniquely designed slide that is: 1. curved to accommodate thicker material and 2. has a post that secures the strap via a punched hole). TwistedNotions.com carries an assortment of slides and conway buckles for use as both buckles and strap length adjusters.

Tri-glide Slides are most often used as a way to make quick size adjustments to strap goods like dog collars and belts. They also can be used as a buckle for low intensity products such as making your own yoga straps.

Tri-glide Slides, used as buckles,  work by using friction to secure the material in place. While the strap is held in tension, friction prevents the materials from sliding through. However, once tension is removed, the materials can be manually fed up and through the slide allowing for adjustment or unfastening.

rose gold dog collar hardware- slide

So is it a Buckle or a Slide?

It’s a fair question! In most applications – particularly those that have high risk associated with failure of the product, like dog collars or climbing harnesses, this type of hardware is never used as a buckle. Under the right conditions, such as a lubricant spilled that reduces friction or construction using a webbing that is too smooth, the potential for the slide moving during use is too high to be relied upon as a buckle alone. In these cases, this type of hardware is always paired with a buckle, and strap ends are secured so that they cannot slip free from the slide and cause failure of the strap.

safety equipment should never be secured with a slide as a buckle - only light duty straps
safety equipment should never be secured with a slide used as the fastener – but slides can work great as cheap fasteners for adjustable light duty straps

 

For yoga straps, lightweight tiedowns (such as compression straps used on camping equipment stored within another bag), belts, or the kinds of straps used in physiotherapy or fitness training, the end of the strap is often left unstitched and the tri-glide slide is used, effectively, as a buckle. For these type of light applications, especially when paired with a webbing that is slightly rough and well-fit to the slide’s openings, the tri-glide slide works exceptionally well as a buckle.

How to Use a Tri-Glide Slide as a No-Sew Buckle

The images below show how we converted a standard dog collar to a annvisible fence receiver collar. Because this was not a dog’s primary collar (it was never used with a leash but instead just used at home to help remind the dog of property boundaries) we modified a standard dog collar and used a tri-slide as a closure for the collar. Follow along to see how easy it is to use a slide as a buckle when you’re working on light-duty straps and want to avoid using a sewing machine.


The black plastic slide near the buckle is an example of a slide used as a mechanism for adjustment. In this photo series, you’ll see how the metal slide can be attached as a type of buckle.

1. Here, I’ve already started my project: I’ve cut open an adjustable dog collar, fed my invisible fence receiver onto the webbing, and rather than trying to sew through the thick material I’m just going to feed a tri-glide slide, onto the webbing and finish the project.

 

The first step is to just feed the webbing up into the slide, over the center bar, and out the opposite opening:

 

Once the slide is threaded onto the material I take the end of the webbing and feed it through the slot on my buckle as shown

It can feel a little complicated at this point, but it’s a simple process to figure out when the strap is in-hand. I’m simply feeding the webbing back from the buckle into the same space of the slide that the webbing exited in step 1.

After feeding the material back into the slide, again got up and over the center bar and out the opposite side. The image below shows the final positioning of the webbing needed, in a loosened form to show detail.

 

Once threaded up through the buckle slot, and back through the slide, the final step is to simply to tighten all the webbing so that the slide can exert the friction needed to hold the webbing in place.

One thought on “Hardware Craft Series: How to Use Tri-Glide Slides”

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: